Doc Q7.0
111
Quad Chorus [QCH]
5.25
The
Quad Chorus
was designed to enable sounds beyond those of the legendary “Tri-Stereo” chorus, a fixture of
80s session player clean sound. It takes time to set up, but your efforts will be rewarded with incredibly lush and
liquid chorus sounds. It is a four-voice chorus with a powerfully complex modulation generator.
Each Axe-Fx II preset can use two fully independent
Quad Chorus
blocks.
Figure 5-35 – The Quad Chorus Block
The parameters of the Quad Chorus are divided across pages for
Master
,
Chorus 1–4
,
Advanced
, and
Mix
.
Master Parameters
TIME
– Scales the times set individually for each of the chorus voices.
RATE
– Sets the master rate against which the rates of LFOs 1–4 are set as multiples.
DEPTH
– Controls the overall depth of all chorus voices.
FDBK
– Feedback for all four voices is controlled solely by this parameter. Classic chorus would typically
require a setting of 0%, while flanging is possible with higher settings (though extreme settings can cause
runaway oscillation).
INPUT MODE
– The STEREO mode is shown above: left input feeds voices 1 and 2; right input feeds voices 3
and 4. In MONO mode, the two inputs are summed into all voices.
