Doc Q7.0
101
Master Parameters
Several of the Pitch Shift types include MASTER parameters, detailed below.
MASTER PITCH
– Scales the SHIFT setting for each of the voices. For example, with
VOICE 1 SHIFT
at “+12,”
VOICE 2 SHIFT
set to “-12,” and
MASTER PITCH
set to “50%,” the shifts will be heard as
VOICE 1: +6, VOICE 2: -6.
MASTER DELAY
– Scales all delay times in the block.
MASTER FEEDBACK
– Scales all feedback controls in the block.
MASTER PAN
– The panning of each voice is multiplied by this value. A value of 100% will result in each
voice being panned as set in the individual pan controls. A value of 0% will result in both voices being panned
to center. A value of -100% will reverse the position of the voices. You can use a modifier on this parameter to
move the voices around the stereo field in real time.
MASTER LEVEL
– Multiplies the level values by this amount.
Pitch Source, Track, and Adjust
PITCH TRACK
– Allows you to select from different styles of pitch shift tracking. When set to “MONO” the
Pitch Shifter will track the pitch of incoming single notes note and adjust techniques accordingly for the best
performance at any moment. “POLY” is best for shifting chords and lower amounts of shift. “OFF” causes the
shifter to use fixed shifting techniques. With pitch tracking OFF, the sound can waver or flutter depending
upon the note(s) played, but this effect can be desirable when simulating certain gear.
TRACK ADJ
– This control allows fine-tuning of the pitch shifter “splice length.” For large shifts, this control
can help improve the quality of the shifted note.
Pitch Shifter Mix Parameters
All
Pitch Shifter
types share a common MIX page with
MIX
,
LEVEL
,
BALANCE
,
BYPASS MODE,
and
GLOBAL MIX
on p.
for more information on these controls.
Details about the different Pitch algorithms appear on the following pages.
