92
Doc Q7.0
Quad Series Delay
5.20.6
The delay lines of the
Quad Series
Delay
are connected end-to-end so that their times are compounded as the
signal travels from one to the next. Each line has its own output tap, however, so the output of any line can also be
heard as it enters the next delay in the series. If you then set each delay time to 100 ms, you would hear echoes at
100, 200, 300, and 400 ms after the input.
Figure 5-22 – The Quad Series Multi-Delay Type
The parameters of the Quad Series Delay are identical to those of the Quad Tap delay (
the absence of the diffusor block controls, the
FEEDBACK SEND
and
RETURN
parameters, and the single
FEEDBACK
control.
FDBK SEND
– Specifies which delay output (1–4) should be tapped to feedback to the input.
FDBK RET
– Specifies which delay input (1–4) the feedback tap should be returned to.
FEEDBACK
– Sets the amount of feedback from the send to the return.
