Doc Q7.0
107
Crystals
5.24.6
The
Crystals
Pitch Shifter is similar to the
Fixed Harmony
mode (p.
) but is designed for special effects. It
features much longer possible “splice” times inside the shifter, reverse shifting, and a flexible feedback
architecture.
Figure 5-32 – The Crystals Pitch Shifter Type
VOICE1 DETUNE, VOICE 2 DETUNE
– Sets the detune amount of the voice in a range of +/- 50 cents.
VOICE1 SHIFT, VOICE2 SHIFT
– Sets the shift amount of the voice in a range of +/- 12 half-steps.
VOICE1 LEVEL, VOICE2 LEVEL
– Sets the volume level of the voice.
VOICE1 PAN, VOICE2 PAN
– Sets the panning of the voice.
VOICE1 DELAY, VOICE2 DELAY
–
Sets the delay time of the voice. When a delay time is shown in
parenthesis, it is being set automatically by a
TEMPO
parameter (see below). Set the corresponding
TEMPO
to
“NONE” for manual control.
VOICE1 DLYTEMPO, VOICE2 DLYTEMPO
– Locks the corresponding TIME parameter in rhythmic
relation to the global tempo.
VOICE1 FEEDBACK, VOICE 2 FEEDBACK
– Sets the feedback of the voice to the input. By delaying and
feeding a voice back, strange pitch effects can be created as the note is shifted again and again.
FEEDBACK TYPE
– Selects the type of feedback. DUAL sends the individual voices back to their respective
delay lines. BOTH mixes the voices and sends them back to both delay lines. PING-PONG sends each voice to
the opposite delay line.
