![background image](http://html.mh-extra.com/html/foundry-networks/switch-and-router/switch-and-router_installation-and-configuration-manual_2324275990.webp)
Foundry Switch and Router Installation and Configuration Guide
26 - 6
December 2000
The following command is optional and changes the default method and URL for the health check. By default, the
Layer 3 Switch sends a HEAD request for the default homepage, “1.0”. The slash in the URL is optional; the
Layer 3 Switch inserts the slash for you if you leave it out.
Syntax:
port http url “[GET | HEAD] [/]<URL-page-name>”
The following command changes the HTTP status codes that the Layer 3 Switch accepts as valid responses to a
health check. The default status code range for HTTP health checks in SLB configurations is 200 – 299. You can
specify up to four discrete ranges. To specify a single message code for a range, enter the code twice. For
example to specify 200 only, enter the following command:
port http status_code 200 200
.
Syntax:
port http status_code <range> [<range>[<range>[<range>]]]
Interface Level
The following commands configure an IP sub-net address that is in the same sub-net as the web site’s IP address.
Enter these commands on the interface that connects the Layer 3 Switch to the real server or to the ServerIron or
third-party SLB that is load balancing for the IP address.
The
ip dont-advertise
command configures the Layer 3 Switch to block advertisement of the network on the
interface. If you do not block advertisement of the network, the Layer 3 Switch will advertise a route to the network
containing the web site even if the web site itself is unavailable. After you enter the
ip dont-advertise
command,
the Layer 3 Switch advertises only a host route to the IP address. Thus, if the web site fails the HTTP health
check, the Layer 3 Switch removes the static host route for the web site’s IP address and also does not advertise
a network route for the network containing the IP address.
Syntax:
ip address <ip-addr> <ip-mask> [secondary]
Or
Syntax:
ip address <ip-addr>/<mask-bits>
Syntax:
ip dont-advertise <ip-addr> <mask>
Or
Syntax:
ip dont-advertise <ip-addr>/<mask-bits>
NOTE:
An IP address in the sub-net you want to block must already be configured on the interface.
Configuring the HTTP Health Check on the Layer 3 Switch
To configure Foundry Layer 3 Switches to perform the HTTP health check for a web site and to manage a static
host route for the IP address, do the following:
•
Identify the web site’s IP address on the Layer 3 Switch.
•
Enable the HTTP keepalive (health check).
•
Optionally modify the health-check keepalive interval and retries.
•
Optionally modify site-specific health check parameters (the URL requested by the health check and the
HTTP status codes that the Layer 3 Switch will accept as a normal response).
•
Configure the port that connects the Layer 3 Switch to the HTTP application (ServerIron, third-party SLB, or
real server) to not advertise the network route for the IP sub-net the ServerIron, third-party SLB, or real server
and the port are on.
For example, to configure Foundry Layer 3 Switches for the configuration shown in Figure 26.1, enter the following
CLI commands.
Summary of Contents for Switch and Router
