Foundry Switch and Router Installation and Configuration Guide
17 - 28
December 2000
Syntax:
deny | permit redistribute <filter-num> all | bgp | connected | rip | static
[address <ip-addr> <ip-mask> [match-metric <value> [set-metric <value>]]]
EXAMPLE:
To redistribute RIP, static, and BGP4 routes into OSPF, enter the following commands on the Layer 3 Switch
acting as an ASBR:
BigIronASBR(config)# router ospf
BigIronASBR(config-ospf-router)# permit redistribute 1 all
BigIronASBR(config-ospf-router)# write memory
Syntax:
deny | permit redistribute <filter-num> all | bgp | connected | rip | static
address <ip-addr> <ip-mask>
[match-metric <value> | set-metric <value>]
NOTE:
Redistribution is permitted for all routes by default, so the
permit redistribute 1 all
command in the
example above is shown for clarity but is not required.
You also have the option of specifying import of just OSPF, BGP4, or static routes, as well as specifying that only
routes for a specific network or with a specific cost (metric) be imported, as shown in the command syntax below:
Syntax:
[no] redistribution bgp | connected | rip | static
For example, to enable redistribution of RIP and static IP routes into OSPF, enter the following commands.
BigIron(config)# router ospf
BigIron(config-ospf-router)# redistribution rip
BigIron(config-ospf-router)# redistribution static
BigIron(config-ospf-router)# write memory
NOTE:
The
redistribution
command does not perform the same function as the
permit redistribute
and
deny
redistribute
commands. The
redistribute
commands allow you to control redistribution of routes by filtering on
the IP address and network mask of a route. The
redistribution
commands enable redistribution for routes of
specific types (static, directly connected, and so on). Configure all your redistribution filters before enabling
redistribution.
NOTE:
Do not enable redistribution until you have configured the redistribution filters. If you enable
redistribution before you configure the redistribution filters, the filters will not take affect and all routes will be
distributed.
USING THE WEB MANAGEMENT INTERFACE
1.
Log on to the device using a valid user name and password for read-write access. The System configuration
panel is displayed.
2.
Click on the plus sign next to Configure in the tree view to expand the list of configuration options.
3.
Click on the plus sign next to OSPF in the tree view to expand the list of OSPF option links.
4.
Click on the Redistribution Filter link.
•
If the device does not have any OSPF redistribution filters, the OSPF Redistribution Filter configuration
panel is displayed, as shown in the following example.
•
If an OSPF redistribution filter is already configured and you are adding a new one, click on the Add
Redistribution Filter link to display the OSPF Redistribution Filter configuration panel, as shown in the
following example.
5.
If you are modifying an existing OSPF redistribution filter, click on the Modify button to the right of the row
describing the filter to display the OSPF Redistribution Filter configuration panel, as shown in the following
example.
Summary of Contents for Switch and Router
