Using Packet Over SONET (POS) Modules
December 2000
6 - 23
Software
You can display status information for a POS module using either of the following methods.
NOTE:
•
Slots on a 4-slot chassis are numbered 1 – 4, from top to bottom.
•
Slots on an 8-slot chassis are numbered 1 – 4, from top to bottom.
•
Slots on a 15-slot chassis are numbered 1 – 15, from left to right.
USING THE CLI
To display the status of a POS module using the CLI, enter the following command at any CLI level:
BigIron> show module
Module Status Ports Starting MAC
S1: B0GMR Management Module ACTIVE 0
S2: BI POS 622M Module OK 2 00e0.5281.eb20
S3: B24E Copper Switch Module OK 24 00e0.5281.eb40
S4: B8G Fiber Switch Module OK 8 00e0.5281.eb60
Syntax:
show module
NOTE:
The module descriptions do not distinguish between SX and LX ports.
The Status column shows the module status. A POS module can have one of the following statuses:
•
FAILED – This status indicates that the host module failed to come up.
•
OK – This status indicates that the module came up and is operating normally.
NOTE:
Management modules have different status values.
USING THE WEB MANAGEMENT INTERFACE
1.
Select the System link to display the System configuration sheet, if not already displayed.
2.
Select the Module link to display the Module panel. The Status column shows the module status. A POS
module can have one of the following statuses:
•
FAILED – This status indicates that the host module failed to come up.
•
OK – This status indicates that the module came up and is operating normally.
Displaying Interface Parameters
To display the current settings for the POS interface parameters, use the following method.
USING THE CLI
To display interface information using the CLI, enter the following command at any CLI level:
BigIron> show interface brief slot 2
Port Link State Encap Clock Loop Speed mtu frame scram crc c2 j0 h1
2/1 up ppp int none 622 1200 sonet no 16 cf cc 00
2/2 up ppp int none 155 1500 sonet no 16 cf cc 00
Syntax:
show interface brief [pos <portnum>] | [slot <slotnum>]
This command shows information for all the ports in the chassis. For simplicity, the example and syntax above
show only the information relevant to POS ports.
Summary of Contents for Switch and Router
