Configuring Virtual LANs (VLANs)
December 2000
25 - 57
Clearing MAC VLAN Entries from the MAC Table
You can clear entries that have been added to the MAC table from a MAC VLAN list. To clear entries, enter the
following command at the Privileged EXEC level of the CLI.
Syntax:
ext clear mac-vlan [mac <mac-addr> <mask>] [vlan <vlan-id>]
If you enter
ext clear mac-vlan
without any of the optional parameters, all the entries added from MAC VLAN lists
are cleared.
The
mac
<mac-addr> <mask> parameter clears only the entries that match the specified address and mask.
The
vlan
<vlan-id>
parameter clears only the entries that match the specified VLAN.
Configuring VLANs Using the Web Management Interface
Use the procedures in the following sections to configure VLANs using the Web management interface.
Configuring a Port-Based VLAN
1.
Log on to the device using a valid user name and password for read-write access.
2.
If you have not already enabled OSPF, enable it by clicking on the Enable radio button next to OSPF on the
System configuration dialog, then clicking Apply to apply the change.
3.
Click on the plus sign next to Configure in the tree view to expand the list of configuration options.
4.
Click on the plus sign next to VLAN in the tree view to expand the list of VLAN option links.
5.
Click on the Port link.
•
If the device does not have any port-based VLANs, the Port VLAN configuration panel is displayed, as
shown in the following example.
•
If at least one port-based VLAN is already configured and you are adding a new one, click on the Add
Port VLAN link to display the Port VLAN configuration panel, as shown in the following example.
•
If you are modifying an existing port-based VLAN, click on the Modify button to the right of the row
describing the VLAN to display the Port VLAN configuration panel, as shown in the following example.
6.
Enter the VLAN ID and optionally the name.
7.
If you want to assign the VLAN to a different Quality of Service (QoS) priority, select the priority from the QoS
field’s pulldown menu. For more information, see “Changing a Layer 2 Port-Based VLAN’s Priority” on
page 11-12.
8.
Select Enable or Disable next to Spanning Tree to enable or disable the feature on this VLAN.
Summary of Contents for Switch and Router
