![background image](http://html.mh-extra.com/html/foundry-networks/switch-and-router/switch-and-router_installation-and-configuration-manual_23242751029.webp)
Policies and Filters
December 2000
C - 25
Broadcast Filters
Broadcast filters are outbound filters that drop Layer 2 broadcast packets that match the filter criteria. You can
filter on all broadcast traffic or on IP UDP broadcast traffic only. You also can specify a VLAN ID so that
broadcasts are dropped only for the specified VLAN.
You can configure up to eight broadcast filters.
NOTE:
Broadcast filters are applied in numerical order, beginning with filter 1.
Action
Broadcast filters forward (permit) or drop (deny) packets.
Scope
You configure broadcast filters globally, then apply them to individual ports. The filters do not take effect until
applied to specific ports. The filters apply only to outbound traffic. The
exclude-ports
command specifies the
ports on which you are excluding the filtered multicast packets.
Syntax
Use the following CLI commands or Web management interface panels to configure broadcast filters.
NOTE:
This is the same command syntax as that used for configuring port-based VLANs. Use the first
command for adding a range of ports. Use the second command for adding separate ports (not in a range). You
also can combine the syntax. For example, you can enter
exclude-ports ethernet 1/4 ethernet 2/6 to 2/9
.
Multicast Filters
Multicast filters are outbound filters that apply to packets that have a Layer 2 multicast address in the destination
MAC address field. You can configure multicast filters to filter on all multicast addresses or a specific multicast
address.
You can configure up to eight multicast filters.
NOTE:
Multicast filters are applied in numerical order, beginning with filter 1.
Action
Multicast filters forward (permit) or drop (deny) packets.
Scope
You configure multicast filters globally, then apply them to individual ports. The filters do not take effect until
applied to specific ports. The filters apply only to outbound traffic. The
exclude-ports
command specifies the
ports on which you are excluding the filtered multicast packets.
Table C.12: Broadcast Filters
CLI syntax
Web management links
BigIron(config)# broadcast filter <filter-id> any | ip udp
[vlan <vlan-id>]
exclude-ports ethernet <portnum> to <portnum>
Or
exclude-ports ethernet <portnum> ethernet <portnum>
Not available
Summary of Contents for Switch and Router
