Foundry Switch and Router Installation and Configuration Guide
10 - 72
December 2000
l4-real-server 1024 2048 1024
l4-virtual-server 256 512 256
l4-server-port 2048 4096 2048
mac 8000 64000 8000
ip-route 128000 200000 128000
ip-static-route 512 2048 512
vlan 16 2048 16
spanning-tree 32 128 32
mac-filter-port 32 512 32
mac-filter-sys 64 1024 64
ip-subnet-port 24 128 24
session-limit 131072 500000 131072
view 10 65535 10
virtual-interface 255 2048 255
Information for the configurable tables appears under the columns that are shown in bold type in this example. To
simplify configuration, the command parameter you enter to configure the table is used for the table name. For
example, to increase the capacity of the IP route table, enter the following commands:
BigIron(config)# system-max ip-route 120000
BigIron(config)# write memory
BigIron(config)# exit
BigIron# reload
NOTE:
If you accidentally enter a value that is not within the valid range of values, the CLI will display the valid
range for you.
To increase the number of IP sub-net interfaces you can configure on each port on a NetIron Layer 3 Switch from
24 to 64, then increase the total number of IP interfaces you can configure on the device from 256 to 512, enter
the following commands:
NetIron(config)# system-max subnet-per-interface 64
NetIron(config)# write memory
NetIron(config)# exit
NetIron# reload
Syntax:
system-max subnet-per-interface <num>
The <num> parameter specifies the maximum number of sub-net addresses per port and can be from 1 – 64. The
default is 24.
Syntax:
system-max subnet-per-system <num>
The <num> parameter specifies the maximum number of sub-net addresses for the entire device and can be from
1 – 512. The default is 256.
NetIron(config)# system-max subnet-per-system 512
NetIron(config)# write memory
NetIron(config)# exit
NetIron# reload
USING THE WEB MANAGEMENT INTERFACE
To modify a table size using the Web management interface:
1.
Log on to the device using a valid user name and password for read-write access. The System configuration
panel is displayed.
2.
Select the Max-Parameter link to display the Configure System Parameter Maximum Value table. This table
lists the settings and valid ranges for all the configurable table sizes on the device.
Summary of Contents for Switch and Router
