manualshive.com logo in svg

Foundry Networks Switch and Router, Installation And Configuration Manual, Page: 146 / 1070

Share
Download
Foundry Networks Switch and Router Installation And Configuration Manual Download Page 146

Foundry Switch and Router Installation and Configuration Guide

5 - 22

December 2000

USING THE CLI

To display a directory of all the files on the flash card that has the management focus, enter the following 
command:

BigIron# dir

 Volume in slot1 has no label

 Volume Serial Number is 19ED-1725

 Directory of slot1

01/01/2000  00:00a    685935     POS.BIN

01/01/2000  00:00a   2157693     M4R.BIN

01/01/2000  00:00a       184     A22.CFG

01/01/2000  00:00a       254   R CFG.CFG

01/01/2000  00:00a       256     STR.CFG

01/01/2000  00:00a   1027230     M5.BIN

01/01/2000  00:00a       184     A8.CFG

01/01/2000  00:00a   1029838     M4S.BIN

01/01/2000  00:00a    687026     P3R.BIN

01/01/2000  00:00a   1029838     MM.BIN

              10 File(s)        6618438 bytes

                               74180608 bytes free

Syntax: 

dir [slot1 | slot2] [<file-name>]

The following information is displayed for each file.

The directory also lists the total number of files that match the value for the name you specified, the total number 
of bytes used by all the files, and the number of bytes still free on the card.

To list only files that contain a specific pattern of characters in the name, enter a command such as the following:

BigIron# dir *.bin

 Volume in slot1 has no label

 Volume Serial Number is 19ED-1725

 Directory of slot1

01/01/2000  00:00a    685935     POS.BIN

Table 5.2: CLI Display of Flash Card File Information

This Field...

Displays...

File date

The date on which the file was placed on the flash module, if the 
Foundry device’s system clock is set.  

Time of day

The time of day at which the file was placed on the flash module, if the 
Foundry device’s system clock is set.  If the clock is not set, the field 
shows 00:00a (12 AM), as shown in the example above.  

File size

The number of bytes in the file.

Read-write attribute

If you have set the file’s read-write attribute to read-only, “R” appears 
before the file name.  If the file’s read-write attribute is read-write (the 
default), no value appears in this column.  For information, see 
“Changing the Read-Write Attribute of a File” on page 5-25.

File name

The file name.

Long file name

The longer file name if the file was created on a PC and the name is 
longer than the 8.3 format.

Summary of Contents for Switch and Router















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments