![background image](http://html.mh-extra.com/html/foundry-networks/switch-and-router/switch-and-router_installation-and-configuration-manual_2324275048.webp)
Foundry Switch and Router Installation and Configuration Guide
2 - 18
December 2000
BigIron# erase startup-config
WARNING:
Use this step only for new systems. If you enter this command on a system you have already
configured, the command erases the configuration. If you accidentally do erase the configuration on a configured
system, enter the
write memory
command to save the running configuration to the startup-config file.
3.
Access the configuration level of the CLI by entering the following command:
BigIron# configure terminal
Privileged EXEC Level
BigIron(config)#
Global CONFIG Level
4.
Configure the IP addresses and mask addresses for the interfaces on the router.
BigIron(config)# int e 1/5
BigIron(config-if-1/5)# ip address 192.22.3.44 255.255.255.0
NOTE:
You can use the syntax
ip address
<ip-addr>/<mask-bits> if you know the sub-net mask length. In
the above example, you could enter
ip address 192.22.3.44/24
.
Syntax:
enable [<password>]
Syntax:
configure terminal
Syntax:
[no] ip address <ip-addr> <ip-mask> [secondary]
or
Syntax:
[no] ip address <ip-addr>/<mask-bits> [secondary]
Use the
secondary
parameter if you have already configured an IP address within the same sub-net on the
interface.
Layer 2 Switches
To configure an IP Address to a Foundry switch:
1.
At the opening CLI prompt, enter
enable
.
FastIronII> enable
2.
Enter the following
command at the Privileged EXEC level prompt (for example, FastIron
II#
), then press
Enter. This command erases the factory test configuration if still present:
FastIronII# erase startup-config
WARNING:
Use this step only for new systems. If you enter this command on a system you have already
configured, the command erases the configuration. If you accidentally do erase the configuration on a configured
system, enter the
write memory
command to save the running configuration to the startup-config file.
3.
Access the configuration level of the CLI by entering the following command:
FastIronII# configure terminal
Privileged EXEC Level
FastIronII(config)#
Global CONFIG Level
4.
Configure the IP address and mask for the switch.
FastIronII(config)# ip address 192.22.3.44 255.255.255.0
5.
Set a default gateway address for the switch.
FastIronII(config)# ip default-gateway 192.22.3.1
NOTE:
You do not need to assign a default gateway address for single sub-net networks.
Summary of Contents for Switch and Router
