Force Computers MODUSYS 2000 Kernel, Manual

Page: 94 / 114

Installing and Removing Option Boards Installing an SBC
ModuSys 2000 Kernel 5-11
Installing an SBC
Danger
Make sure that the mains power supply is disconnected from the module
unit before continuing.
Gefahr
Bitte trennen Sie die Moduleinheit von der Spannungsversorgung, bevor
Sie fortfahren.
Install an SBC as follows (see Figure 27):
1. Follow the instructions in Chapter 3 to dismount the module unit
from a rack if additional access is required.
2. Referring to Figure 22, locate the SBC connector on the backplane.
4. Remove the slot cover if fitted from the chassis and store it for
future use.
5. Carefully install the SBC (1) in the correct connector on the
backplane. Depending on the SBC, you may wish to connect some
PMC options before installing the SBC.
6. Secure the SBC to the chassis by engaging the two retaining locks
(2)
7. Connect the appropriate cables to the SBC. Refer to the user
information manual supplied with each SBC for information
about connecting cables to the SBC.
8. Follow the instructions in Chapter 3 to reassemble the module
unit.
Caution
!
Take care when handling the SBC. The active components on the SBC
are sensitive to electrostatic discharge (ESD), and can easily be damaged.
Take anti-ESD precautions such as wearing isolation gloves or an
antistatic wriststrap.