Force Computers MODUSYS 2000 Kernel, Manual

Page: 70 / 114

Accessing Internal Components Reassembling the Module Unit in the Rack
ModuSys 2000 Kernel 3-7
Reassembling the Module Unit in the Rack
Reassemble the module unit in the rack as follows:
5. Reinstall the module unit in the rack, by reversing the steps in the
section Dismounting the Module Unit in this chapter.
6. Reconnect any of the external cables that were disconnected from
the module unit.
7. Set the power switches to the ON position on all peripherals
connected to the module unit.
8. Set the power switch on the back of the power supply to the ON
position.
9. If necessary, use firmware or operating system commands to test
the operation of the module unit.