manualshive.com logo in svg

Finisar Surveyor, User Manual, Page: 29 / 454

Share
Download
Finisar Surveyor User Manual Download Page 29

1-9

Introduction

What's New in Release 5.0

1

Expanded Multi-QoS Support

The Multi-QoS software has been expanded to recognize a broader range of VoIP 
calls.This includes call formats used by Avaya and Alcatel.

Multi-QoS now has the capabilities to build the call table without signaling 
information. Such calls are listed with a protocol type of UNKNOWN. This can be 
useful to see calls where signaling packets are unsupported or for probing end 
points that do not see signaling packets. 

SMNP Extended Agent

The SNMP agent for Surveyor has been expanded to include management fields 
other than alarms. The new Surveyor agent implementation uses SNMPv2.

New and Enhanced Protocol Decodes

The following protocol decodes are new or enhanced in version 5.0 of Surveyor:

•

ASF-RMCP, Alert Standard Format protocol

Summary of Contents for Surveyor







































































































































































































































































































































































































































































Reviews:

No comments