Finisar Surveyor User Manual Download Page 187

Page: 187 / 454

9-3

Alarms

Current Module Alarms

Press

New Alarm

to enable new alarms for a resource. The Alarm Editor dialog box

appears. Multiple alarms of any type may be added. See the following section for
more information on the Alarm Editor.

Figure 9-2. Alarm Editor

Highlight one or more alarms in the Current Module Alarm window. Press

Modify

Alarm

to modify the highlighted alarms. From the

Modify Alarms

dialog box, change

the characteristics for current alarms. The alarm variable name or alarm group name
cannot be changed. Use the

New Alarm

option to add an alarm with a different

variable.

Figure 9-3. Modify Alarms

To delete one or more alarms, select the alarm(s) and press

Delete Alarm

in the

Current Module Alarms

dialog box. The alarms are deleted only for the current

resource.

Summary of Contents for Surveyor







































































































































































































































































































































































































































































Search results

Summary of Contents for Surveyor

Reviews:

Related manuals for Surveyor

Brands by name

Popular brands

Finisar Surveyor, User Manual

Search results

Summary of Contents for Surveyor

Reviews:

Related manuals for Surveyor

Brands by name

Popular brands