Finisar Surveyor User Manual Download Page 80

Page: 80 / 454

4-20

Surveyor

User’s Guide

8. Enter the IP address of a server that runs BOOTP and/or TFTP protocols in the

IP Boot Server

field.

9. If you are updating the image, set the path name to the software image file in

the

Boot Image Filename

field.

10. Check the

Warm Boot

radio button under

Reset Options

11. Click the

button.

Caution

You must use the

Warm Boot

option to load the new image

from the network. The

Cold Boot

option will not update the

image.

When you reset the device, you will lose the connection. Use the

Connect

option

from the

Remote

menu to reconnect.

When a device is restarted, the new software image is written to non-volatile mem-

ory and becomes the new executable image.
Though not a part of the update procedure, you can use the

Cold Boot

option to force

the device to run its self-tests. These tests will verify that the unit is operating prop-

erly.

Advanced Configuration

surveyor.ini

File

Surveyor uses configuration settings from a

.ini

file called

surveyor.ini

. If you want to run the product with different configurations, you

can save different sets of configuration information in different

.ini

files. Sur-

veyor always looks for the file named

surveyor.ini

in the directory where Sur-

veyor is installed and will use that file for its configuration. If no

surveyor.ini

file is found in the directory, Surveyor will build another

surveyor.ini

file

based on the factory default configuration settings.
Different sets of configuration information can be especially useful for display tim-

ers and update timers. The first eight parameters of the

surveyor.ini

file are the

configuration values for the various display timers.
For information on other

surveyor.ini

settings, contact Customer Support. It is

not recommended that you alter the

surveyor.ini

file directly.

Customizing Expert Diagnostic Information

The

EXPERTMSG.INI

file contains Surveyor’s diagnostic information. Surveyor

always looks for the file named

EXPERTMSG.INI

in the Surveyor installation

Summary of Contents for Surveyor







































































































































































































































































































































































































































































Search results

Summary of Contents for Surveyor

Reviews:

Related manuals for Surveyor

Brands by name

Popular brands

Finisar Surveyor, User Manual

Search results

Summary of Contents for Surveyor

Reviews:

Related manuals for Surveyor

Brands by name

Popular brands