Finisar Surveyor User Manual Download Page 159

Page: 159 / 454

7-23

Capture and Display Filters

Filter Examples

Filter Examples

Filter examples are supplied with Surveyor. To see examples, open a capture filter

file (

.CFD

extension) or a display filter file (

.DFD

extension) from the

Filter

win-

dow. From the

Module

menu, select

Filter Description

to access a description of any

filter. To find more examples, look in the

...\examples\filter

directory.

Filter Example, Capture Conversation

The

Filter Design

window in Figure 7-5 shows a template that captures all packets

going to and coming from two IP stations. The conversation is specified by entering

the two IP addresses, using the <

> indicator to capture packets in both directions.

The

Apply Conversation to Template

check box is selected to apply the conversation

to the filter template. The filter template is named

Station_7and_8_Conversation.

Note that the filter template must be applied to the filter by pressing the

Add

button.

Filter templates must appear in the

Template Combination

box before they can be

loaded to the hardware device.
.

Figure 7-5. Filter Design Window, Conversation Example

Summary of Contents for Surveyor







































































































































































































































































































































































































































































Search results

Summary of Contents for Surveyor

Reviews:

Related manuals for Surveyor

Brands by name

Popular brands

Finisar Surveyor, User Manual

Search results

Summary of Contents for Surveyor

Reviews:

Related manuals for Surveyor

Brands by name

Popular brands