1-1
S E C T I O N 1
Introduction
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
System Features
The OMNI-400, OMNI-400EU, OMNI-600, and OMNI-600EU are state-of-the-art microprocessor-based
control/communicators that provide 4 (OMNI-400 series) or 6 (OMNI-600 series) hardwired zones that
may be doubled. Programming can be performed through any of the compatible keypads, or the system
can be uploaded and downloaded remotely using the Compass Downloader Software. Additionally, the
software can be programmed to control remote actions, such as arming, disarming, bypassing, etc.
Programming options are stored in an Electrically Erasable Programmable Read Only Memory
(EEPROM). The EEPROM is nonvolatile, meaning that programmed instructions will not be lost in the
event of a loss of power.
Features of the OMNI-400, OMNI-400EU, OMNI-600, and OMNI-600EU include:
•
4 (OMNI-400 series) or 6 (OMNI-600 series)
hardwire zones (all fully programmable,
including keyswitch)
•
Hardwire zones can be configured as standard
or double-balanced, or can be set for zone
doubling (providing up to 8 hardwire zones for
the OMNI-400 series or 12 hardwire zones for
the OMNI-600 series)
•
Separate panic switch or arm-only keyswitch
programmable hardwire input that follows
auxiliary key programming.
•
Cross-zoning capability
•
15 User Codes (either 4-digit or 6-digit codes
can be used)
•
Up to 12 keypads (OMNI-LCD, XK-7LC,
OMNI-KP)
XK-108 keypads may also be used;
however, the system can only have XK-108
type keypads attached.
•
Keypad programming and remote
programming via PC and modem
•
Upload/download and remote commands
•
10 programmable relay outputs (using optional
XL4705 modules)
•
4 built-in programmable trigger outputs (2
triggers if relay module is used)
•
Real-time clock (displays time and date via
LCD keypad) with reminder when clock needs
to be set
•
CS test timer by event, time or both (1 hour, 1,
7, 27, 60, 90 days)
•
Customer control of Chime mode and Pager
mode
•
Quick Arming, Quick Bypass, and Quick Force
Arming
•
CS reporting by zone
•
False alarm prevention features: Crossed
Zones, Exit Error, Recent Close, Swinger
Shutdown
•
Cancel Code and System Stabilization during
power-up
•
Arming by keyswitch in Away or Stay mode
•
Key Tamper/Lockout with optional CS
reporting