![background image](http://html1.mh-extra.com/html/fbii/omni-400-eu/omni-400-eu_installation-and-setup-manual_547062052.webp)
OMNI-400/OMNI-400EU and OMNI-600/OMNI-600EU Installation and Setup Guide
6-16
Q 09, L1 —
Enter the L1 digit for the desired options from the table that follows.
L1
Entry
No Bell
if Dial
Delay
Fast
Zone
Double-
Balanced
Zones
0
1
✔
2
✔
3
✔
✔
4
✔
5
✔
✔
No Bell if Dial Delay: If selected, bell sounding will not occur
until the dialer is activated (bell is delayed by the same amount of
time as the dial delay setting). See Question 16, Location 4 for
setting the dial delay (15–255 seconds) and Submode 2, Questions
1–12, Location 4 to enable the dial delay for each zone.
Fast Zone: Sets zone 4 (OMNI-400’s) or zone 6 (OMNI-600’s) to
fast response (10mS). If set, this zone must be wired as a NC loop
(cannot be double-balanced or part of zone doubling).
Double-Balanced Zones: Select if you are using double-
balanced zones. This option allows hardwired zones to be wired
such that a tamper will be detected on an open or a shorted loop.
Q 09, L2 —
Enter the digit for the desired options from the table below.
AC Freq.
L2
Entry
XL4705
Relay Enable 60Hz 50Hz
Bat. Test
4 Sec/Min
0
✔
2
✔
✔
4
✔
6
✔
✔
8
✔
✔
A
✔ ✔
✔
C
✔ ✔
E
✔
✔ ✔
XL4705 Relay Enable: Enables the Relay Module. If
it is used, the system’s built-in triggers 3 and 4 will no
longer be available as triggers. Instead, they will serve
as clock and data lines, respectively, for the relay
module(s). One or two relay modules may be used,
providing 5 or 10 relay outputs.
AC Frequency: Select the AC line frequency, 50Hz or
60Hz.
Battery Test: If enabled, the system battery is tested
for a period of 4 seconds per minute. When not enabled,
the battery is tested for 1 second per minute.
UL
L2 must be programmed with 60Hz enabled for UL installations.
Q 09, L3 —
Enter the digit for the desired options from the table below.
Dialing Method
User
Codes
L3
Entry
Euro Pulse
Dialing (66:33)
TouchTone
Dialing
U.S. Pulse
Dialing (60:40)
4-Digit 6-Digit
Bell/Siren
Supervision
0
✔
✔
1
✔
✔
2
✔
✔
4
✔
✔
5
✔
✔
6
✔
✔
8
✔
✔
✔
9
✔
✔
✔
A
✔
✔
✔
C
✔
✔
✔
D
✔
✔
✔
E
✔
✔
✔