Fagor 8025 GP, Operating Manual

Page: 191 / 423

8025/8030 CNC PROGRAMMING MANUAL 71
6.21. G52. COMMUNICATION WITH THE FAGOR LOCAL AREA NETWORK
The communication between the CNC and the rest of the LAN NODES is carried out thru
registers in complement to two.
These registers may be double (D) or single (R). Next, the different command formats are
described.
a) Transfer of a constant to a register of another LAN NODE.
G52 N2 R3 K5
or:
G52 N2 D3 H8
G52 : Communication with the LAN.
N2
: Address of the DESTINATION NODE (0/14).
R3 : Number of the single register (0/255).
D3 : Number of the double register (0/254).
K5 : Integer value in decimal (+/-32767).
H8 : Integer value in Hexadecimal (0/FFFFFFFF).
Atention:
To access a PLCI register, indicate the number of the node occupied
by the CNC+PLCI
b) Transfer of a value of an ARITHMETIC PARAMETER of the CNC to a register
of another LAN NODE.
G52 N2 R3 P3
or,
G52 N2 D3 P3
G52 : Communication with the LAN
N2
: Address of the DESTINATION node (0/14).
R3 : Number of the single register (0/255).
D3 : Number of the double register (0/254).
P3 : Number of the arithmetic parameter (0/254).
Atention:
To access a PLCI register, indicate the number of the node occupied by
the CNC+PLCI