Fagor 8025 GP, Operating Manual

Page: 340 / 423

220 8025/8030 CNC PROGRAMMING MANUAL
7.4. TWO ANGLES (A1,A2)
One point on the main plane whose coordinate values are not known can be identified by
means of two angles if the coordinate values of the previous and next points along the path
are known by using: A1, A2 XY (YZ) (XZ).
Where A1 is the angle of the exit path from the starting point (P0). A2 is the angle of the
exit path from the intermediate point (P1). XY (YZ) (XZ) are the coordinates of the final
point P2 according to the working plane.
The CNC calculates automatically the coordinates of P1.
Example:
Starting point is X0 Y0
N10 X20 Y10 (Coordinates of P0)
N20 A45 A30 (Exit angle of P0 and P1)
N30 X70 Y50 (Coordinates of P2)