Fagor 8025 GP, Operating Manual

Page: 403 / 423

Page Chapter: 1 Section:
LASER MACHINES 1
1.
LASER MACHINES
1.1 MACHINE PARAMETERS
P619(3) Analog S output proportional to actual axis feedrate.
By setting this parameter, it is possible to control the intensity of the laser BEAM.
The CNC outputs an analog S voltage proportional to the actual feedrate of the
axes.
0 = This feature is not active.
1 = This feature is active.
P622(6) Sheetmetal tracing on laser machines
It indicates whether this feature is active or not.
0 = This feature is not active.
1 = This feature is active.
When using this feature, functions M97 and M98 acquire a special meaning as
described in the section on "Laser Machines" in the chapter on "Concepts" of
this manual.
P806 Distance between the beam and the sheetmetal
In order to trace the profile of the sheetmetal, a device is used attached to the
axis of the laser beam indicating, at all times, the deviations of the sheetmetal
surface.
To do this, this device has a cylinder moving in and out of it and whose tip is
constantly touching the sheetmetal surface.
This parameter indicates the distance this cylinder must penetrate into the device
once its tip touches the sheetmetal. This way, it sets the distance between the
beam and the sheetmetal surface.
This distance is given in microns, regardless of the work-units being used.
Possible values: 0 thru 32000 microns.
If set to "0", this feature will not be activated.
MACHINE PARAMETERS