Fagor 8025 GP, Operating Manual

Page: 313 / 423

8025/8030 CNC PROGRAMMING MANUAL 193
K : Defines the value of 1/2 the pocket’s width; i.e. the distance between the center and
the wall, following Y axis (always positive).
B : Defines the penetration of each milling step (always positive).
C : Defines the value of each machining step in the XY plane. Only positive values are
allowed. If C either is not programmed, or is set to 0 , the CNC assumes that the value
of the step is 3/4 D of the active tool.
D : Defines the distance between the reference (approach) plane and the surface of the
part. The depth of the first machining step is : (D+B).
H : Defines the feedrate in the final machining (finishing pass).
L : Value of the final machining (finishing pass).
F : Defines the machining feedrate.
S : Revolutions per minute of the spindle.
T : Tool number.
M03 : Clockwise spindle rotation.
Second block (N5)
G80 X0 Y0 : Cancellation of canned cycle and return in rapid feedrate to the starting point.
Third block (N10)
M30 : End of program.