Fagor 8025 GP, Operating Manual

Page: 216 / 423

96 8025/8030 CNC PROGRAMMING MANUAL
The measured tool length value is automatically loaded by the CNC in the pertinent tool table
position as L value, setting the K value to zero. This cycle does not modify the R and I values
which must be entered manually either in the operating mode 8 or by programming function
G50.
At the end of this cycle, the parameter table will show the following values:
P93 = Real length minus the tool length L, that was in the tool table prior the execution of this
cycle, on the X axis (YZ working plane).
P94 = Real length minus the tool length L, that was in the tool table prior the execution of this
cycle, on the Y axis (XZ working plane).
P95 = Real length minus the tool length L, that was in the tool table prior the execution of this
cycle, on the Z axis (XY working plane).
STARTING
POINT
MAIN PLANE XY (G17)
FEED G00
FEED P4