Fagor 8025 GP, Operating Manual

Page: 133 / 423

8025/8030 CNC PROGRAMMING MANUAL 13
In G00 movements, P4 machine-parameter can be used to identify whether the feedrate
override knob operates between 0% and 100% or is frozen at 100%.
When the CNC is turned on, after executing M02/M30 or after an EMERGENCY or
RESET, the CNC takes the code G00 on. The code G00 is modal and incompatible with
G01,G02,G03 and G33.
G00 function can be programmed with G, G0 or G00.
When programming G00 function, the last F programmed is not cancelled, that means that
when G01,G02 or G03 is programmed again, the mentioned F is recovered.
6.2.2. G01. Linear interpolation
The movements programmed after G01 are performed in a straight line at the feedrate F
programmed.
When two or three axes move simultaneously, the resulting path is a straight line between
the initial point and the final point.
The machine moves along that path at the programmed feedrate F. The CNC calculates the
feedrates of each axis so that the feedrate of the resulting path is the programmed F.
Example:
G01 G90 X650 Y400 F150