Fagor 8025 GP, Operating Manual

Page: 192 / 423

72 8025/8030 CNC PROGRAMMING MANUAL
c) Loading the value of a register of another LAN NODE into an arithmetic
parameter of the CNC.
G52 N2 P3 R3
or,
G52 N2 P3 D3
G52 : Communication with the LAN.
N2
: Address of the ORIGIN node (0/14).
P3 : Number of the arithmetic parameter (0/254).
R3 : Number of the single register (0/255).
D3 : Number of the double register (0/254).
Atention:
To access a PLCI register, indicate the number of the node occupied
by the CNC+PLCI
d) Sending a text from the CNC to another LAN NODE.
G52 N2 = (TEXT)
G52 : Communication with the LAN
N2
: Address of the DESTINATION node (0/14).
( ) : Text delimiters.
Text : Text whose syntax is admitted by the DESTINATION node.
Example:
Let us suppose that the NODE 7 of the LAN is a FAGOR CNC 82 connected as slave
and its X and Y axes are to be positioned at the X100, Y50 point. The block to be
executed by the CNC will be:
G52 N7 = (X100 Y50)
e) Process synchronization between LAN NODES.
G52 N2
This block will be completed when the LAN NODE N2 has ended the execution of the
current operation. By using this type of blocks, the different operations of several LAN
nodes can be synchronized.
Atention:
Any error at the FAGOR LAN occurring during the execution, the CNC
will display error 111.
More information on the FAGOR LOCAL AREA NETWORK is found in the
INSTALLATION AND START-UP MANUAL, chapter INCORPORATION OF
THE 8025/30 CNC into the FAGOR LOCAL AREA NETWORK.