Fagor 8025 GP, Operating Manual

Page: 66 / 423

8025/8030 CNC OPERATING MANUAL 39
c) The CNC will automatically assign the two positions next to the one entered (the one before
and the one after). So, if by doing this, another “normal” tool has been cancelled,it must be
reentered by keying:
Txx (Tool number)
Pxx (Position number)
ENTER
To redefine a special tool as “normal”:
Txx
N
ENTER
Atention:
If an improper programming of tool change originates error code 053 the
process to resume the operation is the following:
- Select JOG operation mode.
- Key in the number of the tool located in the spindle.
- Key-in P00.
- Press ENTER.
This way, the number of the tool presently engaged in the spindle has been
confirmed to the CNC.
In JOG operating mode, pressing the RESET key returns the CNC to power-
on conditions.