manualshive.com logo in svg

ExtremeSwitching 200 Series, Administration Manual

The Frigidaire 200 Series Use & Care Manual is your essential companion for efficiently operating and maintaining your Frigidaire appliances. This comprehensive manual covers all necessary instructions and tips to ensure optimal performance. Download this manual for free at manualshive.com, your reliable source for hassle-free manual downloads.

Share
Download
background image

Table 52: DHCP Pool Configuration Fields (continued)

Field

Description

Default Router

Lists the IP address of each router to which the client(s) in the pool should send
traffic. The default router should be in the same subnet as the client.

DNS Server

Lists the IP address of each DNS server the client(s) in the pool can contact to
perform address resolution.

NetBIOS Server

Lists the IP address of each NetBIOS Windows Internet Naming Service (WINS)
name server that is available for the selected pool.

After you configure values for the DHCP address pool, click 

Submit

 to create the pool and apply the

changes to the system.

To delete a pool, select the pool from the 

Pool Name

 drop-down menu and click 

Delete

.

Pool Options

Use the Pool Options page to configure additional 

DHCP

 pool options, including vendor-defined

options. DHCP options are collections of data with type codes that indicate how the options should be
used. When a client broadcasts a request for information, the request includes the option codes that
correspond to the information the client wants the DHCP server to supply.

To access this page, click 

System

 > 

Advanced Configuration

 > 

DHCP Server

 > 

Pool Options

 in the

navigation menu.

If no DHCP pools exist, the Pool Options page does not display the fields shown in 

Table 53

.

If any DHCP pools are configured on the system, this page contains the following fields:

Table 53: Pool Options Fields

Field

Description

Pool Name

Select the DHCP pool to with the options you want to view or configure.

Option Code

Displays the DHCP option code configured for the selected Pool.

Option Type

Specifies the type of option associated with the option code configured for the
selected pool. The possible values are as follows:

•

Ascii - The option type is a text string.

•

Hex - The option type is a hexadecimal number.

•

IP Address - The option type is an IP address.

ASCII Value

Shows the Option ASCII Value for the selected pool.

Hex Value

Shows the Option Hex Value for the selected pool.

IP Address Value

Shows the Option IP Address Value for the selected pool.

Delete Option Code

To delete an option code for the selected Pool, enter the option code in the
folder and click 

Delete

. This button is not visible to a user with read-only

permission.

Configuring System Information

ExtremeSwitching 200 Series: Administration Guide

78

Summary of Contents for 200 Series


















































































































































































































































































































































































Reviews:

No comments

Related manuals for 200 Series

BABBITT LS8000 Owner'S Manual preview
LS8000
Brand: BABBITT Pages: 14
BABBITT LS6000 Owner'S Manual preview
LS6000
Brand: BABBITT Pages: 10
Network Technologies VEEMUX SM-nXm-15V-LC Installation And Operation Manual preview
VEEMUX SM-nXm-15V-LC
Brand: Network Technologies Pages: 46
PABX 208AC Instruction Manual preview
208AC
Brand: PABX Pages: 46
ANTAIRA LMX-1002G-SFP Series Hardware Manual preview
LMX-1002G-SFP Series
Brand: ANTAIRA Pages: 22
Radio Systems HUB16-DC Technical Manual preview
HUB16-DC
Brand: Radio Systems Pages: 19
3onedata IES2008 Quick Installation Manual preview
IES2008
Brand: 3onedata Pages: 2
HDTV Supply HDTVMT0808140 User Manual preview
HDTVMT0808140
Brand: HDTV Supply Pages: 21
Metra Electronics CS-HDM3X1SW3 User Manual preview
CS-HDM3X1SW3
Brand: Metra Electronics Pages: 8
NeoPro DOC42 Integrator Manual preview
DOC42
Brand: NeoPro Pages: 36
Generac Power Systems TRANSFER SWITCH Warranty Information Booklet preview
TRANSFER SWITCH
Brand: Generac Power Systems Pages: 1
Raisecom ISCOM2600G (A) Series Product Description preview
ISCOM2600G (A) Series
Brand: Raisecom Pages: 96
Gembird NS-16P2 User Manual preview
NS-16P2
Brand: Gembird Pages: 10
steute ES 98 SR Mounting And Wiring Instructions preview
ES 98 SR
Brand: steute Pages: 8
VICOR 4kW MegaPAC User Manual preview
4kW MegaPAC
Brand: VICOR Pages: 31
3Com CoreBuilder 7000 Management Manual preview
CoreBuilder 7000
Brand: 3Com Pages: 516
Arista 7368X Series Quick Start Manual preview
7368X Series
Brand: Arista Pages: 46
Rose electronics UltraView Pro Installation And Operation Manual preview
UltraView Pro
Brand: Rose electronics Pages: 52

Brands by name

Popular brands

Load more brands