manualshive.com logo in svg

ExtremeSwitching 200 Series, Administration Manual

The Frigidaire 200 Series Use & Care Manual is your essential companion for efficiently operating and maintaining your Frigidaire appliances. This comprehensive manual covers all necessary instructions and tips to ensure optimal performance. Download this manual for free at manualshive.com, your reliable source for hassle-free manual downloads.

Share
Download
background image

To access the Port Detailed page, click 

System

 > 

Statistics

 > 

System

 > 

Port Detailed

 in the navigation

menu.

Table 140: Port Detailed Statistics Fields

Field

Description

Interface

Use the drop-down menu to select the interface for which data is to be displayed
or configured. For non-stacking systems, this field is Slot/Port.

Maximum Frame Size

The maximum Ethernet frame size the interface supports or is configured to
support. The maximum frame size includes the Ethernet header, CRC, and
payload.

Packet Lengths Received and Transmitted

64 Octets

The total number of packets (including bad packets) received or transmitted that
were 64 octets in length (excluding framing bits but including FCS octets).

65-127 Octets

The total number of packets (including bad packets) received or transmitted that
were between 65 and 127 octets in length inclusive (excluding framing bits but
including FCS octets).

128-255 Octets

The total number of packets (including bad packets) received or transmitted that
were between 128 and 255 octets in length inclusive (excluding framing bits but
including FCS octets).

256-511 Octets

The total number of packets (including bad packets) received or transmitted that
were between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets).

512-1023 Octets

The total number of packets (including bad packets) received or transmitted that
were between 512 and 1023 octets in length inclusive (excluding framing bits but
including FCS octets).

1024-1518 Octets

The total number of packets (including bad packets) received or transmitted that
were between 1024 and 1518 octets in length inclusive (excluding framing bits
but including FCS octets).

1519-1522 Octets

The total number of packets (including bad packets) received or transmitted that
were between 1519 and 1522 octets in length inclusive (excluding framing bits but
including FCS octets).

1523-2047 Octets

The total number of packets (including bad packets) received or transmitted that
were between 1523 and 2047 octets in length inclusive (excluding framing bits
but including FCS octets).

2048-4095 Octets

The total number of packets (including bad packets) received or transmitted that
were between 2048 and 4095 octets in length inclusive (excluding framing bits
but including FCS octets).

4096-9216 Octets

The total number of packets (including bad packets) received or transmitted that
were between 4096 and 9216 octets in length inclusive (excluding framing bits
but including FCS octets).

Basic

Unicast Packets

The Transmit column shows the total number of packets that higher-level
protocols requested be transmitted to a subnetwork unicast address, including
those that were discarded or not sent. The Receive column shows the number of
subnetwork unicast packets delivered to a higher-layer protocol.

Configuring System Information

ExtremeSwitching 200 Series: Administration Guide

151

Summary of Contents for 200 Series


















































































































































































































































































































































































Reviews:

No comments

Related manuals for 200 Series

IBM 8265 Site Preparation Manual preview
8265
Brand: IBM Pages: 164
IBM 8265 Nways ATM Switch Problem Determination And Service Manual preview
8265 Nways ATM Switch
Brand: IBM Pages: 174
SMC Networks PF2MC7 Series Operation Manual preview
PF2MC7 Series
Brand: SMC Networks Pages: 102
Zamel Ledix WDN-01 Quick Manual preview
Ledix WDN-01
Brand: Zamel Pages: 2
Thetford Marine TECMA Silence Marine Owner'S Manual preview
TECMA Silence Marine
Brand: Thetford Marine Pages: 9
Grozone Control OSWDN User Manual preview
OSWDN
Brand: Grozone Control Pages: 20
NETGEAR ProSAFE JGS516PE Installation Manual preview
ProSAFE JGS516PE
Brand: NETGEAR Pages: 2
I-Tech NVCIP800 User Manual preview
NVCIP800
Brand: I-Tech Pages: 29
JetNet 5018G Series Quick Installation Manual preview
5018G Series
Brand: JetNet Pages: 20
SMART-AVI DVN-8P Installation Manual preview
DVN-8P
Brand: SMART-AVI Pages: 2
Lanpro SW2400S User Manual preview
SW2400S
Brand: Lanpro Pages: 16
J-Tech Digital JTD-2886 User Manual preview
JTD-2886
Brand: J-Tech Digital Pages: 81
Little Giant RS-5 Instruction Sheet preview
RS-5
Brand: Little Giant Pages: 8
Cables to Go 29508 User Manual preview
29508
Brand: Cables to Go Pages: 16
Texas Instruments XIO3130 EVM User Manual preview
XIO3130 EVM
Brand: Texas Instruments Pages: 17
jbc P105 Instruction Manual preview
P105
Brand: jbc Pages: 4
Ubiquiti EdgeSwitch 16XP Quick Start Manual preview
EdgeSwitch 16XP
Brand: Ubiquiti Pages: 20
Cables to Go UH846 User Manual preview
UH846
Brand: Cables to Go Pages: 3

Brands by name

Popular brands

Load more brands