manualshive.com logo in svg

ExtremeSwitching 200 Series, Administration Manual

The Frigidaire 200 Series Use & Care Manual is your essential companion for efficiently operating and maintaining your Frigidaire appliances. This comprehensive manual covers all necessary instructions and tips to ensure optimal performance. Download this manual for free at manualshive.com, your reliable source for hassle-free manual downloads.

Share
Download
background image

Network DHCPv6

The Network Port DHCPv6 Client Statistics page displays the DHCPv6 client statistics values for the
network interface. The DHCPv6 client on the device exchanges several different types of 

UDP

 messages

with one or more network DHCPv6 servers during the process of acquiring address, prefix, or other
relevant network configuration information from the server. The values indicate the various counts that
have accumulated since they were last cleared.

To access this page, click 

System

 > 

Statistics

 > 

System

 > 

Network DHCPv6

 in the navigation menu.

Table 141: Network DHCPv6 Fields

Field

Description

Advertisement Packets
Received

Number of DHCPv6 advertisement messages received from one or more
DHCPv6 servers in response to the client's solicit message.

Reply Packets Received

Number of DHCPv6 reply messages received from one or more DHCPv6 servers
in response to the client's request message.

Received Advertisement
Packets Discarded

Number of DHCPv6 advertisement messages received from one or more
DHCPv6 servers to which the client did not respond.

Received Reply Packets
Discarded

Number of DHCPv6 reply messages received from one or more DHCPv6 servers
to which the client did not respond.

Malformed Packets Received

Number of messages received from one or more DHCPv6 servers that were
improperly formatted.

Total Packets Received

Total number of messages received from all DHCPv6 servers.

Solicit Packets Transmitted

Number of DHCPv6 solicit messages the client sent to begin the process of
acquiring network information from a DHCPv6 server.

Request Packets Transmitted

Number of DHCPv6 request messages the client sent in response to a DHCPv6
server's advertisement message.

Renew Packets Transmitted

Number of renew messages the DHCPv6 client has sent to the server to request
an extension of the lifetime of the information provided by the server. This
message is sent to the DHCPv6 server that originally assigned the addresses and
configuration information.

Rebind Packets Transmitted

Number of rebind messages the DHCPv6 client has sent to any available
DHCPv6 server to request an extension of its addresses and an update to any
other relevant information. This message is sent only if the client does not
receive a response to the renew message.

Release Packets Transmitted

Number of release messages the DHCPv6 client has sent to the server to
indicate that it no longer needs one or more of the assigned addresses.

Total Packets Transmitted

Total number of messages sent to all DHCPv6 servers.

Click 

Clear Counters

 to clear all the counters. This resets all statistics for this port to the default values.

Time Based Group Statistics

Use the Time Based Group Statistics page to define criteria for collecting time-based statistics for
interface traffic. The time-based statistics can be useful for troubleshooting and diagnostics purposes.

Configuring System Information

ExtremeSwitching 200 Series: Administration Guide

154

Summary of Contents for 200 Series


















































































































































































































































































































































































Reviews:

No comments

Related manuals for 200 Series

Dataprobe iBoot PoE-P General Description Manual preview
iBoot PoE-P
Brand: Dataprobe Pages: 31
IBM ThinkPad 600 Product Overview preview
ThinkPad 600
Brand: IBM Pages: 13
IBM Flex System EN2092 Quick Start Manual preview
Flex System EN2092
Brand: IBM Pages: 2
KanexPro MX-HDBT8X818G Manual preview
MX-HDBT8X818G
Brand: KanexPro Pages: 16
Qlogic SANbox 5802V Installation Manual preview
SANbox 5802V
Brand: Qlogic Pages: 124
Qlogic SANbox 5800V Series User Manual preview
SANbox 5800V Series
Brand: Qlogic Pages: 158
Qlogic SANbox 5602 User Manual preview
SANbox 5602
Brand: Qlogic Pages: 324
Qlogic SANbox 5600 Series Quick Start Manual preview
SANbox 5600 Series
Brand: Qlogic Pages: 8
Qlogic SANbox 5600 Series Supplementary Manual preview
SANbox 5600 Series
Brand: Qlogic Pages: 10
Qlogic SANbox 5200 Series Supplementary Manual preview
SANbox 5200 Series
Brand: Qlogic Pages: 2
Qlogic SANbox 3810 Installation Manual preview
SANbox 3810
Brand: Qlogic Pages: 92
Qlogic SANbox 3810 User Manual preview
SANbox 3810
Brand: Qlogic Pages: 142
Qlogic SANbox 3050 Specifications preview
SANbox 3050
Brand: Qlogic Pages: 2
Qlogic SANbox 1400 Series Specifications preview
SANbox 1400 Series
Brand: Qlogic Pages: 2
Qlogic QLogic Fibre Channel Switch Quick Start Manual preview
QLogic Fibre Channel Switch
Brand: Qlogic Pages: 8
Qlogic SANbox 5000 Series Interface Manual preview
SANbox 5000 Series
Brand: Qlogic Pages: 350
Qlogic SANbox 5000 Series Installation Manual preview
SANbox 5000 Series
Brand: Qlogic Pages: 130
Qlogic QLogic 12000 Series Reference Manual preview
QLogic 12000 Series
Brand: Qlogic Pages: 144

Brands by name

Popular brands

Load more brands