4 From the Transfer menu, click
Send File
.
The Send File window opens.
5 Enter the file path for the file to be downloaded.
6 Make sure the protocol is defined per the transfer option selected in step 2 (XMODEM/YMODEM/
ZMODEM).
7 Click
Send
.
The configuration file is downloaded. The terminal emulation application, such as HyperTerminal, may
display the loading process progress.
Select Serial Speed
Use option
4
to change the baud rate of the serial interface.
To change the baud rate from the Utility menu:
1 On the Utility menu, select 4 and press
[Enter]
. The following prompt displays:
Select option (1-12 or Q):
1 - 2400
2 - 4800
3 - 9600
4 - 19200
5 - 38400
6 - 57600
7 - 115200
8 - Exit without change
Note
The selected baud rate takes effect immediately.
2 The bootup process resumes.
Retrieve Error Log
Use option 5 to retrieve the event log and download it to your ASCII terminal.
To retrieve the event log from the Utility menu:
1 On the Utility menu, select
5
and press
[Enter]
.
The following prompt displays:
Select Mode of Transfer (Press T/X/Y/Z for TFTP/XMODEM/YMODEM/ZMODEM)
2 Select the transfer mode (press T/X/Y/Z for TFTP/XMODEM/YMODEM/ZMODEM).
The following prompt displays:
File asciilog.bin Ready to SEND in binary mode
Estimated File Size 169K, 1345 Sectors, 172032 Bytes
Estimated transmission time 3 minutes 20 seconds
Send several Control-X characters to cancel before transfer starts.
3 The bootup process resumes.
Getting Started
ExtremeSwitching 200 Series: Administration Guide
14
