Turntable control SmartTurn
Installation and commissioning
Dok-ID:EXPERT-0003-EN-2011
33
Safeguarding against restart
DANGER!
Life-threatening danger if restarted without
authorization!
When installing and commissioning, there is
danger of the power supply being switched on
without authorization. This poses a life-threatening
hazard for persons in the danger zone.
Therefore:
– Prior to starting all tasks switch off all energy
supplies and safeguard them from being
switched on again.
Reverse mode
CAUTION!
Material damage in reverse mode!
When commissioning in reverse mode the drive
roller should not be in the overrun area. This would
result in incorrect positions and cause damage.
Therefore:
– Do not traverse the drive roller into the overrun
area.
Pos : 5.3 /SmartTur n/5.2 Montagehinweis e @ 1\mod_1219310064423_38.doc @ 7173
5.2 Mounting instructions
Expert-Tünkers mounts the sensor and the position encoder on the
drive shaft during the manufacturing process.
The customer can mount the control unit at suitable and easily
accessible points with the connections facing down.
Avoid shocks. Take the length of the sensor cable into
consideration when selecting the position.
Pos : 5. 4 / St andardmodule/6 I nst allati on und Erstinbetriebnahme/6.2. 2 Ansc hließ en an die Energievers orgung @ 0\ mod_1193664444675_38. doc @ 1081
5.2.1 Connecting to the power supply
Installation and setup of the power supply is executed by the
customer.
Pos : 5. 5 / Smart Tur n/SmartT urn-N eu- 02.2011/5. 3 Elektrisc he Inst allati on @ 3\ mod_1297777510892_38.doc @ 26020
