Profiles for TETRIX TIG and plasma systems
Profile on the Interbus Module
120
Item No.: 099-008225-EWM01
Byte
no.
Bit no.
Function
Description
1 2 Welding
simulation
Bit allocation:
0
1
Welding simulation switched off
Welding simulation activated
1 3 Reserved
1 4 Reserved
1 5 Reserved
1
6 & 7
Select welding mode
Bit allocation:
Bit1 Bit0
0 0
0 1
1 0
1 1
Select pulse mode
Normal welding active
Thermal pulses active
AC special pulses active (only with AC systems)
Fast pulses active
2 0 WF switching (optional)
Bit allocation:
0
1
Switches between 2 wire drive units
WF case 1 is active
WF case 2 is active
2 1 Cold
wire
on
Bit allocation:
0
1
Check via optional cold wire
Cold wire off
Cold wire on
2 2-7
Reserved
3
0-7
JOB number specification
Select a JOB number in the range
1-255
4 0-7
Main
current
specification,
low-byte
Specification of the welding current, the scaling is
always 100% dependent on the system current in
question:
Range: 0 to 0 x 7FFF
0 corresponds to RANGE-MIN
0 x 7FFF corresponds to the max. system current
5 0-7
Main
current
specification,
high-byte
Specification of the welding current
6 0-7
Secondary
current
specification, low-byte
Specification of the welding current, the scaling is
always 100% dependent on the system current in
question:
Range: 0 to 0 x 7FFF
0 corresponds to RANGE-MIN
0 x 7FFF corresponds to the max. system current
7 0-7
Secondary
current
specification, high-byte
Specification of the welding current
8
0-7
WF cold wire specification,
low byte
Specification of the wire value
Range: 0 to 0 x 7FFF
0 corresponds to 0.0 m/min
0 x 7FFF corresponds to 10.0 m/min or 5.00 m/min
depending on the cold wire feed
9
-
WF cold wire specification,
high byte
Specification of the wire value
