Profiles for TETRIX TIG and plasma systems
Profiles for the CAN DeviceNet module
Item No.: 099-008225-EWM01
87
Actuation data
Byte
no.
Bit no.
Function
Description
0
7
Gas test 2
Bit allocation:
0
1
Manual check of the auxiliary gas
Gas supply off
Gas supply on
1 0 Inching
Bit allocation:
0
1
Signal for wire inching function on the wire feed
drive
Inching off
Inching on
1 1 Position
search
Bit allocation:
0
1
Activates the position search function for the
workpiece
Position search off
Position search on
1 2 Reverse
inching
Bit allocation:
0
1
Signal for wire reverse inching function
Reverse inching off
Reverse inching on
1
3
Start auxiliary process
Bit allocation:
0
1
Start signal for the auxiliary process (plasma)
Auxiliary process off
Auxiliary process on
1
4
Error reset
Acknowledgement signal for system error
1 5 User-defined
output
Bit allocation:
0
1
Switches the user-defined relay output on the bus
module
Relay not switched
Relay switched
1 6 JOB
mode
Bit allocation:
0
1
Signal activates the JOB mode function
JOB mode switched off
JOB mode active
1 7 Welding
simulation
Bit allocation:
0
1
Activates the Simulate Welding function
Simulation active
Simulation off
2
0-3
Program number specification Select a program number in the range 0-15
2 4-6
Reserved
2 7 WF switching (optional)
Bit allocation:
0
1
Switches between 2 wire drive units
WF case 1 is active
WF case 2 is active
3
0-7
JOB number specification
Select a JOB number in the range
1-255
