Profiles for TETRIX TIG and plasma systems
Profiles for the CANopen module
74
Item No.: 099-008225-EWM01
Byte
no.
Bit no.
Function
Description
0 5 Reverse
inching
Bit allocation:
0
1
Signal for reverse wire inching function
Reverse inching off
Reverse inching on
0 6 Position
search
Bit allocation:
0
1
Activates the position search function for the
workpiece
Position search off
Position search on
0 7 Error
reset
Bit allocation:
0
1
Acknowledgement signal for system error
Signal must have positive edge for
acknowledgement
1
0
Start auxiliary process
Bit allocation:
0
1
Start signal to initiate the auxiliary process
Auxiliary process is shut down
Auxiliary process is started
1 1 User-defined
output
Bit allocation:
0
1
Switches the user-defined relay output
On the bus module
Relay not switched
Relay switched
1 2 Welding
simulation
Bit allocation:
0
1
Welding simulation switched off
Welding simulation activated
1 3 Reserved
1 4 WF switching (optional)
Bit allocation:
0
1
Switches between 2 wire drive units
WF case 1 is active
WF case 2 is active
1 5 Reserved
1 6 Reserved
1 7 Reserved
2 0-3
4-7
Program number specification
Not allocated
Select a program number in the range 1-15
3
0-7
JOB number specification
Select a JOB number in the range
1-255
