Profiles for PHOENIX MIG/MAG systems
Profiles for the CANopen module
48
Item No.: 099-008225-EWM01
Tx-PDO 2
Cob ID = 280h + address
Byte
no.
Bit no.
Function
Description
0
0-7
Actual welding voltage value,
low byte
Current actual value for the welding voltage
Range: 0 to 0 x 7FFF
corresponds to 0.0 V to 100.0 V
1
0-7
Actual welding voltage value,
high byte
Current actual value for the welding voltage
2
0-7
Actual welding current value,
low byte
Current actual value for the welding current
Range: 0 to 0 x 7FFF
corresponds to 0 A to 1000 A
3
0-7
Actual welding current value,
high byte
Current actual value for the welding current
4
0-7
Actual wire feed speed value ,
low byte
Current actual value for the wire feed speed
Range: 0 to 0 x 7FFF
corresponds to 0.0 m/min to 40.0 m/min
5
0-7
Actual wire feed speed value ,
high byte
Current actual value for the wire feed speed
6 0-7
Monitoring*
Bit allocation:
0
1
2
3
4-7
Bit field for displaying alarm messages during
welding parameter monitoring
Status = 0, no alarm
Status = 1, alarm
Welding voltage
Welding current
Wire feed speed
WF motor current
Reserved
7 0-7
Not
allocated
*
Up to software version 0.0.9.X, the signals are allocated here!
Tx-PDO 3
Cob ID = 380h + address
Byte
no.
Bit no.
Function
Description
0
0-7
Actual motor current value
low byte
Current actual value for the motor current from the
wire feed system
Range: 0 to 0 x 7FFF
corresponds to 0.0 A to 25.5 A
1
0-7
Actual motor current value
high byte
Current actual value for the motor current from the
wire feed system
2-7 0-7 Not
allocated
