Overview of machine software functions (firmware)
PHOENIX machine software (firmware)
Item No.: 099-008225-EWM01
131
13
Overview of machine software functions (firmware)
The table below provides information for each of the PHOENIX and TETRIX welding systems separately
relating to the relevant functionality of the interface machine software (firmware).
13.1 PHOENIX machine software (firmware)
Software-
number
Item number
Hardware
platform
Function
0.0.8.0 and
earlier
042-00897-00000 00 Initial
version
0.0.9.0 042-00897-00001 00 Improved
signal
logic for I>0 and ignition monitoring
0.0.A.0 042-00897-00002 00 Introduction
of TZ-SET and TZ-RESET
Improvement in the process signal logic
"Ready for welding" signal is no longer reset in the
process
TANDEM option available
Expansion of data profiles
Conversion of the CANOpen profile 0
Conversion to new Analyzer
Manual shielding gas control in control signal mode
from M320 version (0.6.0.0)
13.2 TETRIX
machine
software (firmware)
Software-
number
Item number
Hardware
platform
Function
0.0.8.0 and
earlier
042-00926-00000 00 Initial
version
0.0.9.0 042-00926-00001 00 Improved
signal
logic for I>0 and ignition monitoring
0.0.A.0
042-00926-00002
00
Improvement in the process signal logic
"Ready for welding" signal is no longer reset in the
process
Expansion of data profiles
New control signals for pulse modes, shielding gas and
plasma gas
Conversion to new Analyzer
Manual actuation of shielding gas and cold wire in
control signal mode from T320 version (0.2.C.0)
