Chapter 5 Advanced techniques
69
Editing a multipart cue
Once you have created a multipart cue, you can add or delete channels from the
parts, change channel levels, or change fade and wait times.
Adding, deleting and modifying channels
Follow these steps to make changes to a multipart cue:
1.
Press [Blind]. The
PSC displays the Blind mode screen.
2.
Enter the cue number.
3.
Press [Step/Part]; then enter the part number or press [+] or [-] until the
part you want to edit is displayed.
Note: If you are using a color monitor, when you initially display a multipart
cue, the channels that are tracking from the previous cue are displayed in
green; at new levels are displayed in blue. When you press [Step/Part] to
display a part, channels that make up the selected part are displayed in
blue; channels that make up other parts of the multipart cue are displayed
in green.
4.
Press [Chan], and select the channels you want to modify.
To add channels
Set intensity by level of new channels by pressing [At] and entering a
two-digit level, adjusting the level control strip, or pressing [+] and [-].
To delete channels
Set channel levels to zero by pressing [At] [0] [0].
To change level settings
Set new intensity level by pressing [At] and entering a two-digit level,
adjusting the level control strip, or pressing [+] and [-].
5.
Press [Rec] [Enter] to record the modified part.
