56
Expression Show Control System
Creating SMPTE programs
The
PSC allows you to create SMPTE programs in the SMPTE edit mode, or in
Learn mode.
SMPTE Edit
Follow these steps to create a SMPTE program from the SMPTE edit screen:
1.
Record the cue(s) you want to include in the program.
2.
Press [Edit SMPTE]. The
PSC displays the screen below. (SMPTE edit is a
blind display mode.)
3.
Enter the time of the first SMPTE event you want to create in hours,
minutes, seconds, and frames.
Note: Unlike entering times in other PSC operations, you do not need to
enter a decimal point to indicate frame time.
4.
Press [Enter]. A highlighted zero appears under
AB fader
, and the
PSC
prompts you to enter the number of the cue you want to assign to the AB
fader.
5.
Enter the desired cue number, or press [Enter] to move to the next fader.
6.
Press [At] to set a proportional output level for the cue assigned to the AB
fader.
7.
Enter a proportional level from 0 to 99 percent, or press [Full] (100 per-
cent). If you set a proportional level less than Full, the cue runs at a
percentage of its recorded output level.
Note: You do not need to set a proportional level for the cue. If you do not
enter a proportional level, cue outputs at recorded level.
