50
Expression Show Control System
Playing back the previous cue
The [Back] key replays the most recently played cue, regardless of the order in
which the cues were recorded in the cue sheet. It then plays subsequent cues in
reverse numerical order. For example, if you play cues one, two, three, twenty-
two, and sixteen, then press [Back], cue sixteen will fade into cue twenty-two. If
you press [Back] again, cue twenty-one will play, not cue three.
Cues are played back using the fade and wait times recorded with the cue.
[Back] allows you to play back cues loaded in any fader. If you are using only one
fader, you need only press [Back] to replay the previous cue. If you have cues
loaded into two or more faders, you must press [Back] then the [Go] button
below the desired fader. If you play cues one, two and three in the AB fader and
cues six, seven and eight in the CD fader, pressing [Back] then the AB [Go] plays
back cue two; pressing [Back] then the CD [Go] plays back cue seven.
Note: Each time you press [Back], the PSC resets the cue sheet. The cue
replayed with Back becomes the first cue in the cue sheet. If you then press
[Go] without first pressing [Back], the next numerical cue plays.
Clearing faders
All timed faders are equipped with a [Clear] key
. To clear a cue from the fader,
press the appropriate [Clear] key
. Faders will clear immediately unless you have
reset the default fader clear time
. For instructions on changing default fader clear
time, see page 24.
