24
Expression Show Control System
Setting default fader clear times
The default fader clear time is the length of time required for a fader [Clear] to
fade out channels from the faders. A diagnostic system clear resets [Clear] fade
time to zero; channels fade out immediately when clear time is zero.
To change the fader clear time, follow these steps:
1.
Press [Set Up].
2.
Select 6,
System Settings
, and press [Enter].
3.
Select 3,
Default Fader Clear Time
, and press [Enter].
4.
Enter fader clear time in minutes and seconds (00:00) or in seconds and
frames (00.00), then press [Enter]
. Upfade times can be from 00.01 (one
frame) to 99:59 (99 minutes; 59 seconds).
Note: Enter a decimal point between seconds and frames. (One second
equals thirty frames.)
5.
Press [Enter].
