94
Expression Show Control System
Effects shortcuts
The
PSC assumes you want to organize channels in a pattern. Therefore, you can
enter the numbers of steps and channel numbers you want and create all your
steps at once.
To create all your steps at once, press [Step/Part] [1] [Thru] and then enter the
total number of steps you want
. Then select all the channels you want in the
effect by pressing [Chan] and the channel numbers you want in conjunction with
[Thru] and [And].
The
PSC assigns channels to steps numerically until it reaches the last step; the
next channel is assigned to the first step and so on until all channels are as-
signed.
For example, if you select steps 1 through 10 and then select channels 1 through
60, the
PSC assigns channels as illustrated below.
All your steps will still be selected
. When you enter high and low levels and delay
time, all selected steps are affected
. Remember that you can, but don’t have to,
enter up to 10 channels per step.
You can also select a range of steps by pressing [Step/Part] and then entering
step numbers with [Thru] and [And].
