Chapter 8 Reference
133
Clear
[Clear]’s primary function is to delete cues and tracks. Occasionally an error
message may prompt you to press [Clear].
You can also use [Clear] to reset an incorrect level to zero. To do so, select
channels, and press [At] [Clear].
Deleting a cue or group
To delete a cue or group, follow these steps:
1.
Press [Blind]. You must be in Blind to delete cues or groups.
2.
Press [Cue] or [Group].
3.
Enter the cue or group number you want to delete. If you are deleting a
group, press [Enter] after you enter the group number.
4.
Press [Clear].
5.
Press [Record] to delete cue or group. Or, press [Cue] or [Group] to restore
it.
Clearing a channel to extend a track
[Clear] allows you to clear levels from selected channels in a cue, so that levels
from the previous cue will be pulled into the displayed cue. If the selected
channels were providing new levels that were tracking through subsequent
cues, levels from the previous cue will now provide those levels. To extend a
track, follow these steps:
1.
Press [Blind], and enter cue number you want to modify.
2.
Select channels you want to clear.
3.
Press [At] [Clear].
4.
Press [Track] to clear the selected channels and their tracked levels
through subsequent cues, then press [Enter].
