Ericsson SVP 2000, Reference Manual, Page: 73 / 196

Encoder Web-based GUI Control
Table 4.12 TS Input Details Tabbed Page Item Descriptions
Group Item Description Notes
RTP FEC Enable TS-RTP input with FEC
(available only in “Single
Source” mode) Expected FEC ports on “UDP
Port”+2 and “UDP Port”+4
Switching mode Switching mode between
primary and secondary source Choices are:
Single Source : Only primary
source is used.
Manual : Manual source
switching with “Switch To
Primary/Secondary” push
buttons
Automatic with manual
fallback to primary
Auto with auto fallback to
primary
Settings
Detection threshold The delay after which the input
is considered failing, in
milliseconds
Ethernet interface Ethernet plug from which to
receive the input audio/video
stream. This stream is an
MPEG-2 SD SPTS or MPTS A usual setting is to set video
network on Adaptor 1.
IP address IP address on which to receive
the input audio/video stream This must be either a multicast
address or “0.0.0.0” (unicast
input)
UDP port UDP port on which to receive
the input audio/video stream
Source specific
multicast
Primary Source
Switch to primary
Ethernet interface Ethernet plug from which to
receive the input audio/video
stream. This stream is an
MPEG-2 SD SPTS or MPTS. A usual setting is to set video
network on Adaptor 1.
IP address IP address on which to receive
the input audio/video stream. This must be either a multicast
address or “0.0.0.0” (unicast
input)
UDP port UDP port on which to receive
the input audio/video stream
Source specific
multicast
Secondary source
Switch to secondary
EN/LZT 790 0046/1 R1A 4-27