Ericsson SVP 2000, Reference Manual, Page: 23 / 196

Introduction
1.5.2 Encoder (SVP2000/BAS/EN) Rear Panel
Figure 1.6 shows the rear panel of the SVP 2000 Video Processor Encoder. It
provides a single AC (100-240 V, 50-60 Hz) power supply connector along with the
dual input HD/SDI card. There are three Ethernet adaptors, Adaptors 0 and 1 are
used for control and data, while Adaptor 2 has a fixed IP address for configuration
only.
Adaptor 2
Figure 1.6 Rear View of the SVP 2000 Video Processor Encoder
Notes: All other connectors are for factory use only.
One USB storage device may be connected to any of the USB connectors
on the SVP 2000 Encoder for use with the File Storage license option as an
alternative to using one of the front panel connectors. The USB storage
device must be NTFS (New Technology File System) formatted.
1.5.3 Decoder (SVP2000/BAS/RX) Rear Panel
Figure 1.7 shows the rear panel of the SVP 2000 Video Processor Decoder. It
provides a single AC (100-240 V, 50-60 Hz) power supply connector along with the
HD/SDI output card. There are three Ethernet adaptors, Adaptors 0 and 1 are used
for control and data, while Adaptor 2 has a fixed IP address for configuration only.
Figure 1.7 Rear View of the SVP 2000 Video Processor Decoder
Note: All other connectors are for factory use only.
Adaptor 1
AC Power
Supply
USB Connectors
Adaptor 0
RX0 HD/SD SDI Input
RX1 HD/SD SDI Input
USB Connectors
Adaptor 2
Adaptor 1
AC Power
Supply
USB Connectors
Adaptor 0
HD/SD SDI Output
USB Connector
EN/LZT 790 0046/1 R1A 1-15