Ericsson SVP 2000, Reference Manual, Page: 194 / 196

Events Descriptions
InputData: ”enterprises.26199.1.2.1.9.3.X”, X=channel number
Message Description
0 Input Data not Available
1 Input Data Available
SDPFile: ”enterprises.26199.1.2.1.9.4.X”, X=channel number
Message Description
0 SDP File not Available
1 SDP File Available
TSBitrate: ”enterprises.26199.1.2.1.7.3.4.X”, X=channel number
Message Description
<TSbitrate>
Channel had to change its output transport bitrate to a value higher than
specified. This happens only if the specified output transport bitrate is less
than the sum of specified audio and video bitrates plus transport overhead.
Resize: ”enterprises.26199.1.2.1.4.2.1.3.1.X”, X=channel number
Message Description
1
The video input resolution isn’t allowed in pass-through. The video output is
resized with the maximum allowed resolution.
Video Frame Rate Forced: Number Of Units In Tick: ”enterprises.26199.1.2.1.4.2.1.14.1.X”,
X=channel number
Message Description
<NumUnitInTick>
The video frame rate conversion is not allowed. For example, double
frame-rating available for 25 to 50fps, not for 25 to 59,94fps
Video Frame Rate Forced: Time Scale: ”enterprises.26199.1.2.1.4.2.1.15.1.X”, X=channel number
Message Description
<TimeScale>
The video frame rate conversion is not allowed. For example, double
frame-rating available for 25 to 50fps, not for 25 to 59,94fps
ActivetNetSrc: ”enterprises.26199.1.2.1.3.2.12.X”, X=channel number
Message Description
0 Error : there is no available active source
1 The currently active source is the primary source
2 The currently active source is the secondary source
EN/LZT 790 0046/1 R1A C-6