Ericsson SVP 2000, Reference Manual, Page: 29 / 196

Installing the Equipment
Cautions!
Openings in the cabinet are provided for ventilation and to ensure reliable operation
of the product and protection from overheating. These openings must not be
blocked or covered. Clean filters periodically.
This product should never be placed near or over a radiator or other source of heat.
This product should not be placed in a built-in installation such as a rack unless
proper ventilation is provided or the instructions have been adhered to.
Do not install equipment so that the air intake of one aligns with the outlet on
another. Provide baffles and adequate spacing.
2.3.2.1 Openings in the Chassis
Cool air is drawn into the unit from the front, passes through the unit and exits via
the rear panel openings.
Figure 2.1 Unit Ventilation
2.3.2.2 Care in Positioning
Caution!
The equipment should never be placed near or over a radiator or other source of
heat. It should not be placed in a built-in installation such as a rack unless proper
ventilation is provided and the instructions have been adhered to.
Allow at least 40 mm free air-space at each side of the equipment to ensure
adequate cooling. Racks containing stacked equipment may need to be forced air-
cooled to reduce the ambient temperature within the rack.
EN/LZT 790 0046/1 R1A 2-5