Ericsson SVP 2000, Reference Manual, Page: 12 / 196

Introduction
1.1.3 Equipment Label
1.1.3.1 Contents of the Label
On the equipment is an information label ( Figure 1.1) which identifies the
configuration of the unit. The inclusion of options may affect the rear panel labeling.
Figure 1.1 Equipment Labeling
Model: SVP 2000
Table 1.2 Equipment Labeling Description
Item Description Note
Model Identifies the product
Type
Product Type
A reference (Supply Object) which identifies
the build standard of each unit
MN
Manufacturing Number/Barcode
Used for unit identification in the
manufacturing process
SN Serial Number A unique number for unit identification
Only used at altitude not
exceeding 2000m.
Only used in non-tropical
climate regions.
1.1.4 Firmware/Software Versions
This guide has been written to cover the functionality of the firmware/software
versions which are contained within the Device Software Version 3.0.
This guide continues to be relevant to subsequent build versions where the
functionality of the equipment has not changed. Where the build standard changes
the functionality, a new issue of this guide will be provided.
EN/LZT 790 0046/1 R1A 1-4