Ericsson SVP 2000, Reference Manual, Page: 44 / 196

Getting Started
Note: The IP addresses on the Adaptors must not conflict with other devices or
share the same network as other adaptors on the same unit.
3.7 Starting and Stopping the SVP 2000 Encoder
When the Encoder is configured, click Connect under the SDI Input menu to start
the Encoder. Click Stop to stop the encode process.
Note: To make changes to the unit’s configuration it must be in a stopped state.
If the incoming source is missing or incorrectly configured and the Encoder is
started, then the unit will be in a
Waiting state until this is resolved.
If the incoming source is present and correctly configured and the Encoder is
started, then the unit will be in a
Running state. The Preview will display sample
images of the incoming video.
This page will also indicate if there is an issue within the SVP 2000 and can
generate the unit’s logs.
Figure 3.5 Encoder SDI Input Page
EN/LZT 790 0046/1 R1A 3-10